- The typical shortcoming is the creased horn cover harm, which is brought about by its maturing. To guarantee the antenna typical activity, we recommend the client ought to supplant it once each in spring and harvest time individually and month to month investigate if the outside of the horn cover is clear and clean it convenient.
- Client should fix it by the high-recurrence low-misfortune white paint, yet not the ordinary white paint, when the surface artistic creation stripping off.
- Measure the antenna ground opposition consistently; better-execution helping assurance gear ought to be introduced.
- At the point when the snow covered the antenna, client can attempt to utilize the technique for high-elevation pour drive by the high-pressure fixture and clear the day off. In the high-recurrence snow zone, de-icing hardware ought to be amassed.
- In the event that waveguide fixing is not acceptable, the inflator will be fueled on recurrence, which can cause the transfer in the inflator broken and over voltage defensive gadget disappointment, and too huge expansion weight can ruin the horn disguise dispersing. Client should check whether the waveguide fixing frequently and notice if the inflator can work regularly; dispose of the flaw once establishing it.
- Turn the antenna in a huge reach, client ought to notice the varicose degree of waveguide, do not harm the waveguide.
- Kindly select greasing up oil reliable with the model, low-temperature outrageous weight greasing up oil and hostile to erosion paint to change the oil or fix it.
- The most recurrence deficiency is for the antenna azimuth and height limit switch. Because of interlocking effects, when the antenna cannot be pivoted, flaw shows up; this is a significant checkpoint. The breeze and downpour erosion may cause the reaching purpose of the cutoff switch terrible, or the maturing transmission links may cause the short out, so client should check and supplant it as expected.
Antenna Control System
- When do the antenna support receptoare satelit tv, client should remove all the force inside the working district. The voltage of antenna driver is 380V, so close to home security is significant, and support individual permitting ought to be held at switchboard.
- The shortcomings frequently show up in the drive control box and force flexibly, generally for blowing the wire. After check and guarantee no short out, supplant it and it will be typical.
- Check routinely the force connector, check if the transfer and substituting flow electric stun gadget has the wonder of consuming dark because of the starting, if truly, supplant it as expected.
- Kindly do not change the boundaries in the antenna control unit irregular, for example, EOS, A.O.S, and so forth